Draft - Wireless IPT Quick Reference Guide 10/04
2
Battery Charging
Important!
You must charge the battery continuously for five
hours before using the telephone for the first time.
³
To charge the Battery
1. Remove the battery cover on the back of the handset by
pressing the latch and sliding the cover down and off the
handset.
2. Slide the battery pack into the handset.
3. Securely close the battery compartment cover by sliding it up
until it snaps into place.
4. Plug the AC
adapter cord into
the input jack on
the charging unit
(shown right).
You can wire the
AC adapter cord
either to the rear (figure a) or to the left side (figure b).
5. Plug the AC adapter into a standard 120VAC wall outlet.
6. Place the handset in the charging unit (shown below).
7. Ensure that the HANDSET CHARGE LED lights steady Red.
If it does not, make sure that the AC adapter is plugged in and
that the handset is making good contact with the charging unit
contacts.
7623
a
b
7622
CIX-QR-WIPT2000.book Page 2 Tuesday, September 14, 2004 5:20 PM
