28
MTS Broadcast Compatibility
This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to
your stereo system or stereo TV, you will experience the SAP or stereo sound.
Preparation
Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.
Recording the SAP/Stereo Broadcast
1
On the SET UP screen (page 14),
select “SAP SET” using
PLAY/x2 or
STOP, and set to “ON” using REW
or
FF.
2
Press
PROG. once to exit.
3
Perform a recording.
SAP (Second Audio Program broadcast):
A separate audio program, usually broadcast in a second language with the
main language.
Selecting a sound
Sounds recorded on the tape
According to your setting of “SAP SET” on the SET UP screen, the sound is recorded onto different
tracks of the tape as below. Set “SAP SET” to “ON” or “OFF” appropriately.
Hi-Fi sound track
Contents of recorded sound
On-Screen Display
(Press
DISPLAY.)
Setting of “SAP SET”
on the SET UP
screen
Type of receiving
broadcast
Normal sound
track (Mono)
L
R
“SAP”
“STEREO”
“ON” or “OFF”
not lit
not lit
MONO
MONO
MONO
“ON” or “OFF”
not lit
lit
MONO (MIXED)
“ON”
lit
not lit
MONO
MONO
SAP
“OFF”
lit
not lit
MONO
MONO
MONO
“ON”
lit
lit
MONO
MONO
SAP
“OFF”
lit
lit
MONO (MIXED)
STEREO
STEREO
Regular
(monaural audio)
Stereo
SAP
SAP
Note
When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.
RECORDING
TV
VCR
PROG.
ENTER
TV/ VCR
POWER
CH/TRK
TV VOL
I.SELECT
REMAIN/
COUNTER
DISPLAY
COUNT RESET
SP/ SLP
REC
TIMER
SLOW
PLAY/x2
PAUSE/STILL
REW
F F
1
2
3
4
5
6
7
8
9
CANCEL
A.SELECT
EJECT
0
100
CM SKIP
CURSOR
STOP
DISPLAY
1
2
A.SELECT
Sounds in playback
You can play SAP and/or stereo broadcast with this VCR. Press A.SELECT to select a desired sound.
Desired sound L , R indicator in the On-Screen Display Sound Output
SAP Sound R (right) is on SAP
Stereo Sound Both R (right) and L (left) are on HIFI Sound
W-627 Eng (24-28)
2/28/02, 3:28 PM
28
