background image

3

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship
your VCR. For maximum protection, repack the set as it was originally packed at the factory.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit.
Do not leave rubber or plastic products touching the unit for a long time. They will mar the
finish.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.
When the VCR is exposed to such a change in temperature, moisture may condense on the
cylinder inside, one of its most crucial internal parts. To prevent the VCR from possible
damage, do not use the unit for at least 2 hours when there is an extreme or sudden change
in temperature.

Compatibility

This video cassette recorder (VCR) is compatible with any other VCR bearing the 
mark. HQ VHS equipment is also compatible with existing, non-HQ VHS equipment.

INTRODUCTION

As an E

NERGY

 S

TAR

  Partner, TOSHIBA has determined that this product or

product model meets the E

NERGY

 S

TAR   

guidelines for energy efficiency

.

®

®

W-515/TSB (1-9)

11/12/01, 14:39

3

Содержание W-515



































Отзывы: