ELECTRICAL ADJUSTMENTS
D3-5
2-25: HORIZONTAL SIZE (CINEMA)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to CINEMA.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (55) on the remote control to
select "HS CINEMA".
Press the LEFT/RIGHT button on the remote control
until the SHIFT quantity of the OVER SCAN on right
and left becomes 11
±
2%.
2-26: PC (CINEMA)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to CINEMA.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (56) on the remote control to
select "PC CINEMA".
Press the LEFT/RIGHT button on the remote control
until the both ends of the vertical lines are straight.
2-27: CC (CINEMA)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to CINEMA.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (57) on the remote control to
select "CC CINEMA".
Press the LEFT/RIGHT button on the remote control
until the horizontal line of the monoscope pattern
comes to approximate center of the CRT.
2-28: VERTICAL SIZE (16:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 16:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (61) on the remote control to
select "VS 16:9".
Press the LEFT/RIGHT button on the remote control
until the SHIFT quantity of the OVER SCAN on upside
and downside becomes 8
±
2%.
2-29: HORIZONTAL SIZE (16:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 16:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (62) on the remote control to
select "HS 16:9".
Press the LEFT/RIGHT button on the remote control
until the SHIFT quantity of the OVER SCAN on right
and left becomes 11
±
2%.
2-30: PC (16:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 16:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (63) on the remote control to
select "PC 16:9".
Press the LEFT/RIGHT button on the remote control
until the both ends of the vertical lines are straight.
2-31: CC (16:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 16:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (64) on the remote control to
select "CC 16:9".
Press the LEFT/RIGHT button on the remote control
until the horizontal line of the monoscope
pattern comes to approximate center of the CRT.
2-32: VERTICAL SIZE (14:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 14:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (68) on the remote control to
select "VS 14:9".
Press the LEFT/RIGHT button on the remote control
until the SHIFT quantity of the OVER SCAN on upside
and downside becomes 15
±
2%.
2-33: HORIZONTAL SIZE (14:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 14:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (69) on the remote control to
select "HS 14:9".
Press the LEFT/RIGHT button on the remote control
until the picture size is 520
±
5mm.
2-34: PC (14:9)
1.
2.
3.
4.
5.
Receive the monoscope pattern.
Change the wide screen mode to 14:9.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (70) on the remote control to
select "PC 14:9".
Press the LEFT/RIGHT button on the remote control
until the both ends of the vertical lines are straight.
Содержание VTW2887
Страница 1: ...SERVICE MANUAL COLOR TELEVISION VIDEO CASSETTE RECORDER DVD VIDEO PLAYER VTW2887 ...
Страница 89: ...I1 3 143 144 141 142 137 146 147 148 149 TM101 142 140 MECHANICAL EXPLODED VIEW PACKING DIAGRAM 140 ...
Страница 105: ...TOSHIBA VIDEO PRODUCTS PTE LTD 438B ALEXANDRA ROAD BLOCK B 06 01 ALEXANDRA TECHNOPARK SINGAPORE 119968 ...
