Toshiba VTD1551, Руководство по обслуживанию

Страница: 17 / 65

DISASSEMBLY INSTRUCTIONS
B2-3
Fig. 2-6-C
Insulator (R)
Main Chassis Ass'y (Top Side)
2-7:
Remove the screw
1
.
Remove the Rack Feed Ass'y.
Remove the screw
2
.
Remove the Switch PCB Ass'y.
Remove the 2 screw
3
.
Remove the Feed Motor.
Remove the Motor Gear.
1.
2.
3.
4.
5.
6.
7.
RACK FEED ASS'Y/SWITCH PCB ASS'Y/FEED
MOTOR (Refer to Fig. 2-7-A)
Fig. 2-7-A
Main Chassis Ass'y
1
Rack Feed Ass'y
3
3
Motor Gear
Feed Motor
Fig. 2-7-C
6.0
±
0.2mm
Safety surface for pressing
of the insert.
Feed Motor
Motor Gear
~ FEED MOTOR ~
BLUE (4)
ORANGE (3)
~ SPINDLE MOTOR ~
BLACK (2)
RED (1)
Fig. 2-7-D
Switch PCB Ass'y
• Install wire from (1) to (4) in order.
Fig. 2-7-E
Main Chassis Ass'y (Bottom Side)
Check Hook
Check Hook
Check Hook
Check Hook
• Loosen the wire in the direction of the arrow.
NOTE
1.
2.
3.
4.
When pushing the Rack Feed in the direction of the
arrow, it should be restored to the original position by
the spring force. (Refer to Fig. 2-7-B)
In case of the Motor Gear installation, check if the value
of the Fig. 2-7-C is correct.
When installing the wire of the Switch PCB Ass'y, install
it correctly as Fig. 2-7-D.
After the assembly of the Main Chassis Ass'y, hook the
wire on the Main Chassis Ass'y as shown Fig. 2-7-E.
Fig. 2-7-B
Push
• Screw Torque: 5.0
±
0.3kgf•cm (Screw
1
)
• Screw Torque: 3.0
±
0.3kgf•cm (Screw
2
)
• Screw Torque: 1.0
±
0.3kgf•cm (Screw
3
)
• Screw Torque: 3.5
±
0.3kgf•cm (Screw
4
)
Rack Feed Ass'y
2
Switch PCB Ass'y