2
INSTALLATION ––––
Please keep the following caution.
HOW TO SET THE LEGS
1. Spread a blanket on the fl oor and lay the machine down on its back.
2. Insert the legs into the corners of the cabinet base and drive 2 screws
for each leg.
OUTLET OF THE DRAIN HOSE
When the drain hose outlet is exchanged to left side of the machine.
1. Push down and remove
the drain hose from the
hose hook on the lower
end of the machine.
a
Do not push the drain hose into the cabinet.
a
The drain hose should be laid fl at
on the ground. Water fl ow will be
restricted if any portion of the
drain hose is raised more than
15 cm (6 in.) from the ground.
INSTALLING THE GROUND PIN
a
The ground pin in the plug should be connected to the proper point of the socket for grounding.
INSTALLATION PLACE
a
Install the machine on a stable and level place.
a
Using the washer in a damp place such as a bathroom may cause defective insulation or corrosion. Avoid such a
location.
a
Sometimes the plastic portions change their color or deform in direct sunshine. So avoid exposing to direct sunshine.
CAUTION
CAUTION
Good
No good
No good
2. Push up the drain
hose and hold it into
the other hose hook.
Screws
Legs
15 cm or less
a
The length of the drain hose may be extended
to as much as 3 m if kept level. If any other
extension hose is used, purchase a drain hose
cap separately.
3 m or less
6328037401_(02-07).indd 2
6328037401_(02-07).indd 2
11/10/09 11:10:54 AM
11/10/09 11:10:54 AM
