Toshiba VCP-C8, Руководство по обслуживанию

Страница: 8 / 74

Reference Information
Toshiba 2-3
1
Turn on the TV. Tune your TV channel.
2
Connect your VCP to the TV by A/V cable
as above figure.
3
Select the recording speed (SP/LP) by
pressing the SPEED button.
4
Hold down the REC (
●
) button to start line
recording.
5
Press the STOP (
■
) button to end line
recording.
➢
Line recording is not available for
the TV which has no A/V
OUTPUT JACK.
Recording From TV
Recording from Another VCR
TV
VIDEO
LINE OUT
LINE IN 1
AUDIO
ANTENNA IN
RF OUT
AUDIO OUT
VIDEO OUT
VIDEO IN AUDIO IN
TV
VIDEO
LINE OUT
LINE IN 1
AUDIO
ANTENNA IN
RF OUT
L H
ON
OFF
ON
OFF
OUT TO TV
V IDEO OUT
TEST
AUDIO OUT
IN FROM ANT.
ATT
R
L
AUDIO
OUT VIDEO
OUT
VCR
VIDEO IN AUDIO IN
You can copy a cassette to your VCP from another
video source, such as another VCR.
☛
It is an infringement of copyright laws to
copy prerecorded cassettes or to re-
record them in any form without the
permission of the owners of the
corresponding copyright.
1
Turn on the TV.
2
Connect the playback side VCR’s A/V cable
to the recording side VCP’s video and audio
in (rear panel).
3
Select the recording speed (SP/LP) by
pressing the SPEED button.
4
Begin playback on the playback side VCR
and hold down REC (
●
) button.
5
Press the STOP (
■
) button to end line
recording.
➢
To prevent accidental
erasure
Remove this safety tab
with a screwdriver.
➢
To record again
Cover the tab hole with
adhesive tape.
Video system Colour system Video system
of the recording of a VCP recorded on the
source tape
PAL AUTO or PAL PAL
SECAM MESECAM MESECAM
NTSC NT3.58 NTSC
➢
Setting the colour system according to the
colour system of a source you want to record.