5
4
D-1
D-2
D-3
E-1
B-Preparing for Use
C-Cleaning
B-1 To connect hose, push it into the hose inlet
on the main unit. Connect extension tube and
floor brush.
•
To disconnect the hose, pull out while pushing
the button on the swivel connector.
B-2 Store accessory nozzles in the holder.
•
Attach the accessory holder to the extension
tube, and store Upholstery Brush, Dusting
Brush and Crevice Nozzle.
B-3 Adjust the length of extension tube.
•
Push the length adjustment button downward
(in the direction of arrow) and adjust to the
length of your favor.
B-4 Adjust suction power.
•
Adjust the suction power with suction
regulator.
•
Suction power is weakened by sliding the
regulator forward and open the vent.
•
Suction power is strengthened by sliding the
regulator backward and close the vent.
C-1 Pull power cord out of the main unit, and plug
in to the wall socket.
•
Yellow mark indicates the remaining cord is
approx. 1m.. Red mark indicates the cord is
pulled out to the maximum length.
C-2 Press ON/OFF power switch and start
cleaning.
C-3 Adjust suction power.
•
Adjust the suction power with power control
knob.
•
Suction power is strengthened by sliding the
regulator forward.
•
Suction power is weakened by sliding the
regulator backward.
C-4 Use accessory nozzle by attaching to the end
of handgrip.
•
Use at adjust suction power is weakened.
C-5 Adjust floor brush.
•
Adjust the kind of floor with ON/OFF brush
switch.
•
ON/OFF brush switch is knocked down
backward and it cleans on flooring.
•
ON/OFF brush switch is knocked down
forward and it cleans on carpet.
•
In case of operating more than 2 hours, power
is turned off as the safety device acts.
•
Unplug from wall socket and leave the main
unit at a cool place for 1 hour.
D-After Use
E-Dust Indicator
D-1 Press ON/OFF power switch to turn off the
power, and unplug from wall socket.
D-2 Press the cord rewind button and store the
power cord.
•
When rewinding power cord, hold the plug to
prevent any injury.
D-3 Shorten the extension tube and insert the
stand stopper into the storage slot on the main
unit.
E-1 When the dust bag becomes full and the dust
indicator on the main unit lights, clean the dust
bag.
•
To check the dust indicator, lift up the floor
brush from the floor.
•
If the dust indicator appears while cleaning
with accessory nozzle, check if the indicator is
still on even without the nozzle.
•
If the dust indicator is still on even after
detaching the nozzle, clean the dust bag.
Before cleaning, unplug the power plug from the
wall socket.
Cleaning Dust Bag
F-1 Detach the hose from the main unit, and open
the lid by pressing lid release tab.
F-2 Take out the dust bag and take off the sliding
fastener.
F-3 Throw away the dust in the dust bag.
F-4 Wash the dust bag with hands and leave it dry
at a shaded place.
F-5 Set the dust bag to the main unit.
F Cleaning Filter
F-6 Detach the hose from the main unit, open the
lid and take out the dust bag.
F-7 Take out the filter and wash the filter by gently
pressing it in water, and leave it dry at a
shaded place.
F-8 Set the filter to the main unit.
F-Maintenance
Turn off the Switch before unplugging, Unpiug
for Turn off the Main Switch before unplugging.
Unpiug from outlet before maintenace
CAUTION
B-1
B-2
B-3
B-4
Red Mark
Yellow Mark
C-1
C-4
1
2
C-3
1
2
C-2
F-1
F-7
F-8
F-2
