Page 82
4.3 Input (XW), Output (YW) and Configuration (MW) Register Allocation
For Digital Expansion Models:
The Physical Inputs and Outputs in the Expansion modules are accessed using XW and YW registers respectively.
The digital inputs in the Digital Expansion Models are updated in the (Input) XW registers.
The expansion model may have XW or YW registers depending on availability of the physical input/outputs for that
model type. As given in Section 7.2 ‘Memory Allocation of XW, YW and MW’, different expansion models have
different number of XW, YW and MW memory assigned for them in the base model.
e.g. The digital expansion model GDI216**S has 1 XW register memory assigned for it.
There are no outputs so no YW memory. So the input condition of GDI2816**S is read in Input Register XWxx00.
Same inputs are shown in the input coils Xxx000 to Xxx015. Here xx denotes the slot number in which the
expansion model is connected to V200.
Similarly, outputs register for GRO216**S model is YWxx00. For GDR288**S model it has one XW and one YW,
but only 8 bits are used. Other bits are not used.
For Analog Expansion Models:
Analog Inputs and Outputs in the Analog Expansion models are accessed using XW and YW registers respectively.
The type of input channel is configured from configuration registers MW.
GAD208*S:
Sr. No.
Description
Register
Type
1
Channel 1 Input Data
XWxx00
R
2
Channel 2 Input Data
XWxx01
R
3
Channel 3 Input Data
XWxx02
R
4
Channel 4 Input Data
XWxx03
R
5
Channel 5 Input Data
XWxx04
R
6
Channel 6 Input Data
XWxx05
R
7
Channel 7 Input Data
XWxx06
R
8
Channel 8 Input Data
XWxx07
R
9
Channel 1 Type Select
MWxx08
R/W
10
Channel 2 Type Select
MWxx12
R/W
11
Channel 3 Type Select
MWxx16
R/W
12
Channel 4 Type Select
MWxx20
R/W
13
Channel 5 Type Select
MWxx24
R/W
14
Channel 6 Type Select
MWxx28
R/W
15
Channel 7 Type Select
MWxx32
R/W
16
Channel 8 Type Select
MWxx36
R/W
17
Input Conversion Enable
MWxx40
R/W
18
Reserved
MWxx41
-
19
Reserved
MWxx42
-
20
Reserved
MWxx43
-
21
Reserved
MWxx44
-
22
Reserved
MWxx45
-
Содержание V200 GAA242**S
