Toshiba UPP350BT, Руководство пользователя

Страница: 66 / 232

3-12
User’s Manual
GGGGG
ETTINGETTINGETTINGETTINGETTING
S S S S S
TARTEDTARTEDTARTEDTARTEDTARTED
Starting Hibernation
NOTE: You can also enable Hibernation by pressing
Fn + F4
. See Chapter
5, Keyboard, for details.
To enter Hibernation mode, follow the steps below.
1. Click Start and click Turn Off Computer .
2. In
Turn Off Computer
, click Hibernate . The Standby icon will be
displayed initially. To display the Hibernate icon press the Shift key.
The computer will also enter Hibernate mode automatically when you:
❑
Press the power button.
❑
Close the lid (the Display).
First, however, make the appropriate settings according to the steps below.
1. Open the Windows Control Panel .
2. Open Performance and Maintenance .
3. Open TOSHIBA Power Saver .
4. Select the Hibernate window, select the Enable Hibernate support check
box and click the Apply button.
5. Select the Power Save Modes window.
6. Double-click Power Save Modes and open the System Power Mode
window.
7. Enable the desired Hibernation settings for When I press the power
button and When I close the lid .
8. Click the OK button.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a moment to
save current memory data to the hard disk. During this time, the
Disk indicator will
light.
After you turn off the computer and memory data is saved to the hard disk, turn off
the power to any peripheral devices.
CAUTION: Do not turn the computer or devices back on immediately.
Wait a moment to let all capacitors fully discharge.