13
INSTALLATION
Levelling the Washer Dryer
• Check with the gradienter if the machine placement is balanced and steady.
• If there is no gradienter, check the balance as per the following method.
Warning!
b
a
c
Front Cover
Control Panel
Top Cover
1.If it’s balanced from left to right.
• Take a long stick, and tie a rope at the end of it.
Bind a heavy object at the end of the rope.
• Hang the rope from the top cover of the
machine. Adjust the legs till the difference
between ‘a’ and ‘b’ is less than 1cm.
2.If it’s balanced from front to back
• Put the stick at the middle of the control panel, and hang the rope in front
of themachine.
• Keep 10cm away from the rope end to the control panel edge. Adjust the legs
till ‘c’ is 3.5~4.5cm (‘c’ is the distance from rope to bottom of front cover ).
