Toshiba TLP450E Скачать руководство пользователя страница 40

Страница: 40 / 52

CONTENTS

Maintenance

If there is some problem inside the projector,
the indicators light up or flash.

Trouble indications

Off or lit (red)

LAMP

–

TEMP

–

The power does not come on.

→

Malfunction of the unit.

• Unplug the power cord and call the

dealer.

Lit (red)

LAMP

Lit (red)

TEMP

–

The lamp turns off or does not light up.

→

The lamp’s end, or malfunction of the
unit.

• Lamp’s life length is over, replace the

lamp with new one.

• Unplug the power cord and call the

dealer.

Lit (red)

LAMP

–

TEMP

Lit (red)

The power turns off or does not come on.

→

The inside is too hot, or the projector has
been working in an area of high
temperature.

• Place the projector correctly so the

intake and exhaust fans’ holes are not
covered.

• Turn the projector off, and leave it for

a while, and turn it on again.

• Clean the air filter.

Lit (red)

LAMP

–

TEMP

Flashing (red)

The power turns off or does not come on.

→

Trouble with the intake fan.

• Unplug the power cord and call the

dealer.

Lit (red)

LAMP

–

TEMP

Flashing (orange)

The power turns off or does not come on.

→

Trouble with the exhaust fan.

• Unplug the power cord and call the

dealer.

Note

Before attempting any maintenance, unplug the
power cord.

ON Indicator
LAMP Indicator
TEMP Indicator

ON/STANDBY

MENU

ENTER

SELECT/ADJUST

INPUT

LAMP

TEMP

Содержание TLP450E





















































Результаты поиска

Содержание TLP450E

Отзывы:

Похожие инструкции для TLP450E

Бренды по названию

Популярные бренды

Toshiba TLP450E, Руководство пользователя

Результаты поиска

Содержание TLP450E

Отзывы:

Похожие инструкции для TLP450E

Бренды по названию

Популярные бренды