Toshiba TLP-X4500, Руководство по обслуживанию

Страница: 20 / 55

19
TLP-X4500(P5XMLA)
6-2 Before replacing the LCD/LENS PRISM assembly (or LCD/PRISM assembly)
You should not replace separately the parts of the liquid crystal LCD/LENS PRISM assembly because it
works properly only when used together. Therefore, regarding these parts, you can either replace part, LCD/
LENS PRISM assembly (or LCD/PRISM assembly), or send the whole unit LCD/LENS PRISM assembly (or
LCD/PRISM assembly) back to SUPPLIER, where we will replace the malfunctioning part, recondition the
device and send it back to you.
6-3 Putting batteries
CAUTION
About the battery
• Always handle the batteries with care and use them only as directed. Improper use may result in battery
cracking or leakage, which could result in fi re, injury and/or pollution of the surrounding environment.
• Keep a battery away from children and pets.
• Use only the battery specifi ed: two AA batteries.
• Do not mix new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading the battery (as indicated in the
remote control).
• Dispose of batteries in accord with environmental laws.
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus minus terminals
(as indicated in the remote control).
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into
place.
DISTRIBUTOR SUPPLIER
OR
G Panel
Do not disassemble the
unit because replacement
of separate parts is not
possible.
Return
Replacement of G Panel Reconditioning
G Panel