1-34
5-2. Shading adjustment software
1-1 Get the shading data from the projector
(1) Select [get] from [Projector] menu.
(2) Select commucation port and press [Go] button.
1-2 Save the original shading data to PC
(1) Select [Save] from [File] menu.
(2) Input file name and press [Save] button.
(1) When you load the data from PC, select [Load]
form [File] menu.
(3) After getting the shading data, the following message
appired. Press [OK] button.
1. When DRIVE PCB is exchanged.
(Brfore Exchanging Drive PC Board)
Step1. Get shading data from old Drive PCB.
Step2. Save the data to PC memory.
Step3. Exchange the Drive PCB.
Step4. Set the old data to new Drive PCB.
1-3 Set the shading data to the projector
(After Exchanging Drive PC Board)
