Toshiba TheaterWide 44HM85, Руководство по обслуживанию

Страница: 13 / 38

- 13 -
6. Screen Position Adjustment
Area code adjustment: default(H: 0, V: 0)
6-1. Required Test Equipment
Remote Controller
6-2. Horizontal Position Adjustment
(1) Enter the adjustment mode.
(2) Select POSITION in the adjustment menu.
(3) The adjustment pattern below appears.
(4) Change data by using the VOLUME keys on the remote
control in order to adjust left/right screen symmetry.
(5) In case of over variable range is N.G.
<Fig . 2> Pattern for Screen Position Adjustment
6-3. Vertical Position Adjustment
(1) Change data with using CHANNEL key on the remote
Controller in order to adjust Upper/Lower screen symmetry.
(2) In case of over variable range is N.G.
After adjustment is completed, recieve a NTSC-M Digital
Pattern and check the adjusment level.
Adjustment
Adjustment
<Fig . 3> Digital Pattern
6-4. Area code Adjustment
(1) Enter the adjustment mode.
(2) Select Number 1 to the Area code of the adjustment menu.
7. Auto Color Balance Adjustment
7-1. Required Test Equipment
Remote Controller, MSPG-925FS Pattern Generator
(NTSC, 720p YPbPr output & PC 1024x768 @60Hz with
Standard(0.7Vpp)Vertical 100% Color Bar Pattern &
Vertical16 Gray Pattern)
<Fig. 4> COLOR BAR Pattern>
7-2. Preparation for Adjustment
(1) Connect power and turn TV set on.
(2) Perform Heat-Run for at least 5 minutes.
(3) Receive the Component1.
(4) Receive Color bar pattern of MSPG-925FS. <Fig. 4>
7-3. Adjusting the Auto Color Balance
Set TV into component input mode.
(1) Enter the adjustment mode after more than 10 seconds fo
receiving the signals(Color Bar Pattern).
(2) In adjustment items, enter the Auto RGB(HEX) and press
the ( ) button to enter the adjustment items.
Enter the Auto Color Balance ( ) t o Set in the top of menu.
Press the button ( ) to complete and then the "OK" OSD
message will be displayed.