- 25 -
8)
Click cross box mark
X
till 21 or 22 appears.
If 21 or 22 does not appear, TV may not be in the fi rmware installation mode. Unplug the AC power
cord of TV and repeat steps from 3-1-2 "Preparation".
9) Click [Erase Flash] to erase fl ash memory data.
10) Click [Load Bin -> Flash] to start installation of the fi rmware.
Note: Progress window appears and wait till 100% completed.
8)
9)
10)
11) Press the Jig switch down. (
)
12) Disconnect the cable from PC connector on TV.
13) Unplug the AC power cord, and plug it again and turn ON the power of TV.
3-1-3. Confi rmation after Installation of VCTi Firmware
Go into service mode to check that the VCTi fi rmware version is upgraded.
Upgraded VCTi fi rmware version
