TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
3. Remove
two
M2.5x2.8 black flat head screws
securing the keyboard.
4. Remove
one M2.5x2.8 black flat flat head screw
securing the keyboard holder plate and lift out the
plate.
KEYBOARD REMOVAL
1. Turn the computer right side up and open the
display panel.
2. Using the
case separator
, unlatch the
keyboard
holder
at the top of the keyboard.
5. Lift out the
keyboard
and set it as shown above.
6. Remove the
one
M2.5x6 black screw
securing the
keyboard support plate and lift out the plate.
KEYBOARD REMOVAL
7. Set the
keyboard
as shown above. Make sure to put
insulator between the LCD and the Keyboard.
8. Disconnect the
keyboard cable
from
PJ123
on
the system board.
8. Lift out the
keyboard
.
Keyboard holder
Keyboard
M2.5x2.8 black screws
Keyboard
holder
plate
Keyboard support plate
M2.5x6 black flat head screws
Keyboard
Keyboard
Keyboard cable
CN7
M1 Series
