Toshiba TEC CB-416-T3-QQ Скачать руководство пользователя страница 70

Страница: 70 / 122

Chapter 3 Printing

Be sure to check the following in each property page before
printing:

•

Label size and orientation. See Section 3.3 for more detail.

•

Dithering and intensity. See Section 3.4 for more detail.

•

Print method, sensor, label gap, issue mode, print method, fine
adjustment, and so on. See Sections 3.6 for more detail.

•

Print density adjustment. See Section 3.7 for more detail.

When finished checking the property pages, click OK to return to
the Print dialog.

Set Print range and Number of copies, and click OK to start
printing the label.

•

The ON LINE LED flashes when the printer is communicating
with your computer.

•

The ON LINE LED illuminates while printing.

This completes printing a sample label.

Note:

If the ERROR LED flashes or
illuminates, and an error message
appears on the printer’s Message
Display, an error has occurred. Please
see Chapter 6 to take the proper action.

Note:

Only five property pages are available
in the application programs: Page
Setup, Graphics, Stock, Options, and
About.

3.10

Printing a Label
(Cont.)

Содержание TEC CB-416-T3-QQ



























































































































Результаты поиска

Содержание TEC CB-416-T3-QQ

Отзывы:

Бренды по названию

Популярные бренды

Toshiba TEC CB-416-T3-QQ, Руководство пользователя

Результаты поиска

Содержание TEC CB-416-T3-QQ

Отзывы:

Бренды по названию

Популярные бренды