27
Manual Tracking
The projector adjusts tracking automatically to match the video signal
from your computer. However, if the display shows evenly spaced,
fuzzy, vertical lines or if the projected image is too wide or too narrow
for the screen, try turning
Auto Image
off then back on again. If the
image is still bad, try adjusting the tracking manually:
NOTE: The Manual Sync,
Manual Tracking, Horiz. Posi-
tion and Vert. Position options
are available only for computer
sources. The projector sets these
options automatically for a
video source.
1 Turn Auto Image off.
2 Highlight Manual tracking, the press either mouse button repeatedly
until the fuzzy vertical bars are gone.
Positioning adjustments are saved when you power off the projector.
Horizontal position
Follow these steps to manually adjust the horizontal position:
1 Turn Auto Image off.
2 Highlight Horizontal position, then press the left mouse button to
move the image right or press the right mouse button to move the
image left.
Positioning adjustments are saved when you power off the projector.
Vertical position
Follow these steps to manually adjust the vertical position.
1 Turn Auto Image off.
2 Highlight Vertical position, then press the left mouse button to move
the image down or press the right mouse button to move the image
up.
Positioning adjustments are saved when you power off the projector.
