56
57
Operations
The Setting 2 menu
Item
p
q
Description
Projection
mode
Set the projection mode. Press and select the projection mode using
p
q
.
•
Standard—standard forward facing projection.
•
Rear ceiling—inverts and reverses the image for ceiling mounted projection from behind the screen.
•
Rear—reverses the image for projection from behind the screen.
•
Ceiling—inverts the image for standard ceiling mounted projection.
Display time
Set the menu display time. Press and select the display time using
p
q
.
Continuous/5 sec./15 sec./45 sec.
Background
Set the default background appearance. Press and select the background using
p
q
.
Blue/None/Logo
Password
Enable or disable the password security feature
p.45
.
Key lock
Enable or disable the key lock security feature. When enabled, the control panel on the
projector is locked—the menus can only be accessed using the remote control.
Press and select On or Off using
p
q
.
DynamicBlack
Enable or disable DynamicBlack. The DynamicBlack feature improves the appearance of black
areas of the projected image. Press and select On or Off using
p
q
.
RC sensor
Enable or disable the front and reaer remote control sensors. Press and select the
sensor mode using
p
q
.
Both/Front/Rear.
Network
setting
Configure the network settings if the projector is connected to a network. Enable DHCP or
disable DHCP and enter network IP address information in the supplied fields.
Select
Apply settings
to confirm the network information
p.57
.
Standby mode
Select the desired standby mode. Press and select the standby mode using
p
q
.
Standard/Power-saving
PC control
Select the path for PC Control. Press and select the PC control path using
p
q
.
PC control/Network
Using the Setting menus (Continued)
Network settings
<DHCP>
If you set
DHCP
to
Enable
, the IP address of the projector is assigned automatically
by the DHCP server. If your network environment does not assign IP addresses
automatically, set
DHCP
to
Disable
, then set the following items manually.
Note
IP address and Subnet are required fields if
DHCP
is set to
Disable
.
<IP address>
When
DHCP
is set to
Disable
, consult with your network administrator for the settings
below and set the
IP address
manually.
An IP address is a unique number assigned to a device. The format is a string of four dot-
separated three-digit numbers. (Example: 111.112.xxx.xxx)
<Subnet>
A subnet mask is used to determine what subnet the IP address assigned to a device belongs to.
(Example: 255.255.xxx.xxx)
<Gateway>
This value specifies the IP address of the device, such as a router, to be used to access servers
outside the network. (Example: 111.112.xxx.xxx)
<DNS>
This value specifies the IP address of a
Domain Name Server (DNS)
if present.
(Example: 111.112.xxx.xxx)
<Apply settings>
Select
Apply settings
to confirm the projector’s new network settings.
•
