Toshiba TDP-TW100B, Руководство по обслуживанию

Страница: 5 / 90

Chapter 1
1-2
■
CONTROL terminal
●
Pin assignment
Mini DIN 8 Pin Connector
●
lnterface format
1 Communication method
RS-232C,9600bps,No Parity,Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format
Only 1 command valid per communication.
3 Data format For input commands,only ASCll-compliant all-uppercase alphanumeric
characters supported.
4 Replies Acknowledge :Normally ended
:Aborted
No Acknowledge
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
●
Main Commands
Item Command
Power on PON
Power off PDF
Icon display on MC0
Icon display off MO1
Auto setting (RGB input) PAT
Status display on DON
Status display off DOF
Note
●
Contact your dealer for control cable and other commands.
Pin
No. Signal
Name Description
1 RXD Receiving data
2 CTS Consent to send
3 DSR Data set ready
4 GND Signal ground
5 RTS Request to send
6 N.C No connection
7 TXD Sending data
8 GND Signal ground
STX(02h) Command(3Byte) ETX(03h)
ACK(06h) CR (0Dh) Data
ACK (06h) ESC (1Bh)
NAK (15h)