2-14
S8 T8 T9
No
Procedure
Photo
2
Assembly Notice:
1. Check if DMD pins are broken
or tilted and if there is any rem-
nant or dirt.
2. Please stick Thermal Pad in the
middle of DMD socket (shown in
red circle) and the edge of tape
cannot touch DMD socket.
3. Protruding facet faces down
(towards the insulation Maylar)
4. Insulation Mylar gap face right
3
Remove DMD Seal Rubber
and DMD Mask Plate.
1
2
3
4
DMD Seal Rubber
DMD Mask Plate
