background image

40

Using USB Memory 

(continued)

Exit Slideshow / Stop playing movie file

Press 

 button to exit slideshow while the slideshow is in operation or to stop playing movie

file during movie file play back.

Note

With USB memory function, the projector may not accept any operations for a short time
after the movie file is played back. In this state, please wait for a while without
performing any operations.

There is no sound output during slideshow. When playing back the movie file, the sound
will be played back.

The sound may not be played back when playing back the movie file due to file formats.

Some movie files may not be played back smoothly due to different movie file formats.

Disconnecting USB memory

If slideshow is playing, press

key to exit sildeshow mode. Wait for a while without

conducting any operations.
USB memory can be unplugged safely after the thumbnails are displayed in the file view
mode.

About USB memory function

M

The USB terminal

The USB terminal of the projector is USB 1.1 compliant, which can connect with a USB
memory.

N

USB memory

2GB limited USB memory size.

Do not support USB HDD (Hard disk).

Do not support USB hub.

O

USB memories whose operation has been verified.

TOSHIBA does not guarantee the operation of all listed USB memories.
TOSHIBA USB memory :U2E series (256MB, 512MB, 2GB)
SanDisk USB memory :SDCZ4 series (1GB, 2GB)
SanDisk USB memory :SDCZ6 series (1GB)
SanDisk USB memory :SDCZ7 series (2GB) 

Note

This projector does not support all USB memories.

Содержание TDP-PX10





















































Отзывы: