Toshiba TCx 2tc, Быстрое руководство по установке

Страница: 14 / 24

4. Print a Test/Status receipt to verify that the setup was successful and to identify other
network information
Note: Network settings (such as the IP address and Hostname) are printed on the Test/
Status Receipt. This information might be required to complete solution setup and view
connection status. See Firmware offline tests and the Test/Status Receipt for additional
information.
Using the TCx Printer Configuration Utility
To use the TCx Printer Configuration Utility, complete the following steps.
1. Run the TCx Printer Configuration Utility from a network attached system, such as a
computer or POS system.
2. Select the network Device menu (available printers will be listed by IP address). You might
need to refresh the list to show a new printer, or in some cases you might need to enter the
IP address.
3. Select the printer to be set up and enter the required parameters.
4. Save the configuration and restart the printer to use the new settings.
5. Print a Test/Status receipt to verify the setup was successful, and to determine important
network information.
Note: The network settings (such as the Network name, IP address, and Hostname), which
might be required to complete the solution setup, are printed on the Test/Status Receipt. See
Firmware offline tests and the Test/Status Receipt for additional information.
Using the web interface
To use the web interface, complete the following steps.
1. Using a network attached system such as a computer or POS system, open a browser to the
printer IP address printed on the Test/Status receipt that was previously printed.
2. Login to the printer using the default ID/Password of admin/Admin.
3. Open the Ethernet page and enter the required parameters.
4. Save the configuration and restart the printer to use the new settings.
5. Print a Test/Status receipt to verify that the setup was successful and to identify other
important network information.
Initiating the customer receipt test (Test/Status Receipt)
After printing a test receipt, complete the following steps to initiate the customer receipt test.
1. Press and hold both the paper feed
A
and document feed
B
buttons to enter offline mode.
14
TCx Dual Station Printers Quick Installation Guide