– 5 –
5-EN
Owner’s Manual
5
TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
6
Hi POWER display
Indicates when the high power operation starts.
Press the Hi POWER button to start and press it
again to stop the operation.
7
P
(PRESET) display
Indicated when memorizing the preferred
operation mode or when it has been memorized.
Also, this icon is indicated when the memorized
preferred operation is displayed.
8
(COMFORT SLEEP) display
Indicated during the OFF timer operation that
automatically adjusts the room temperature
and the fan speed. Each time you press the
COMFORT SLEEP button, the display changes
in the sequence of 1h, 3h, 5h, and 9h.
9
(QUIET) display
Indicated during the quiet operation.
10
Swing display
Indicated during the swinging operation where
the horizontal louver automatically moves up
and down.
11
Air puri
fi
er display
Indicated during the air puri
fi
er operation are
activated.
NOTE
When both wired remote controller and wireless
remote controller are used, display on the screen of
wireless remote controller may differ from the actual
operation in some cases.
■
Preparation and check before use
1. Loading Batteries
•
Remove the battery
cover.
• Insert 2 new batteries
(R03 [AAA]) following
the (+) and (-) positions.
2. Removing Batteries
•
Remove the battery cover.
• Remove the 2 used
batteries.
Batteries
• To replace the batteries, use two new batteries
(R03 [AAA]).
• In normal use, the batteries will last about one year.
• Replace the batteries if there is no receiving beep
from the indoor unit or when the air conditioner
cannot be operated using the remote controller.
• To avoid malfunctions by battery leakage, remove
the batteries when not using the remote controller
for more than one month.
• Please dispose of the used batteries according to
the local regulation.