manualshive.com logo in svg

Toshiba T6400, Руководство по обслуживанию

Поделиться
Скачать
Toshiba T6400 Скачать руководство пользователя страница 134

4-16

4.

Remove the six M2.5x8 Silver and one M2.5x4 Silver Screws (Figure 4-13).

NOTE:  To remove the DC Fans, also remove the two M2.5x4 Silver Screws indicated in
Figure 4-13.  To remove the Top Cover, it is not necessary to remove these two screws.

Figure 4-13  Removing the seven screws

5.

Turn the T6400 so that its Rear Cover is facing you.  Remove the four outside M2.5x4
Silver Screws and three outside M2.5x6 Silver Screws (Figure 4-14).  Then remove the
Rear Cover.

6.

Remove the four M2.5x4 Silver Screws securing the Rear Support.  Then remove the
Rear Support.

NOTE:  If an expansion card is installed in the expansion slot, remove the one M2.5x4
screw securing the expansion card and then remove the card.

NOTE:  If your T6400 has a Matsushita Power Supply Unit, the Rear Support is secured by
four screws.  If your T6400 has a Toshiba Power Supply Unit, the Rear Support is secured
by three screws (Figure 4-14).

Figure 4-14  Removing the rear cover and rear support screws

M2.5x4 silver screws
(for fan replacement)

M2.5x8 silver screw

M2.5x4 silver
screw

M2.5x8 silver screws

Содержание T6400







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды