Toshiba SX-2801 Скачать руководство пользователя страница 2

Страница: 2 / 40

GETTING STARTED: DO THIS FIRST!

FIRST,

CHARGE THE HANDSET BATTERY!

•

Set your new phone in an out-of-the-way place near a
power outlet where it will not be disturbed.

• Plug the AC adaptor into the wall outlet.

• Plug the AC adaptor cord into the power jack on the base

unit.

• Take the cover off the handset battery compartment; plug

the battery connector into the receptacle inside the battery
compartment and replace the cover. The connector only
goes in one way.

• Place the handset into the base unit’s charging cradle. The

IN USE/CHARGE LED should light. If not, see
TROUBLESHOOTING, page 35.

• The battery charging period has now started. From now

until the 12-16 hours period is complete, do not let anything
cause the handset to be removed from electrical contact
with the base unit’s charging pins or power to be removed
from the base unit.

SECOND,

•

Before you can take advantage of the Caller ID and Call
Waiting features, you must subscribe to these services
from your local telephone company.

• Name and number caller ID only work in conjunction with

service provided by your local telephone company.

THIRD,

Enter your AREA CODE, see page 16.

SX-2801.qxd 3/15/1 6:02 PM Page 2

Содержание SX-2801









































Результаты поиска

Содержание SX-2801

Отзывы:

Похожие инструкции для SX-2801

Бренды по названию

Популярные бренды

Toshiba SX-2801, Руководство пользователя

Результаты поиска

Содержание SX-2801

Отзывы:

Похожие инструкции для SX-2801

Бренды по названию

Популярные бренды