Toshiba SureMark 4610 2CR, Руководство по оборудованию

Страница: 45 / 70

B
A
Incorrect Correct
Figure 23. Ribbon path around the printhead
4. Make sure the ribbon is correctly positioned with the print head guides, as shown in Figure
23.
5. Once the cartridge is in place, close the ribbon cover. The ribbon will be moved into the
correct position.
Supported ribbon types
Attention: Using an inferior grade of ribbon can affect the print quality, printhead life
expectancy, and printer mechanisms.
The 4610 Models 2CR and 2NR require a stuffer-box ribbon type (feed rollers pull the ribbon
from one end of the cartridge and stuff it into the cartridge cavity of the other end). The Epson
ERC 35 ribbon meets these specifications; however, other original equipment manufacturers also
offer replacements that are adequate.
Inserting checks (Model 2CR only)
The Model 2CR printer is capable of printing verification information on a check or an inserted
document. You must correctly insert your check or document into the printer to use this printer
feature. To correctly insert a check into the printer, complete the following steps, as shown in
Figure 24.
Chapter 4. Using and maintaining the 4610 printer
45