Toshiba SureMark 4610 2CR Скачать руководство пользователя | Manualshive

Страница: 41 / 70

background image

Note: When selecting a paper, ensure that the paper's archive life meets the requirements of the

tax authorities of your country for archiving tax-related data.

Thermal paper

The paper used in the thermal receipt station must meet the following requirements:

Width

79.5 ± 0.5 mm (3.13 ± 0.02 in.)

Outside Diameter

102 mm (4.0 in.) maximum

Thickness

57 μm (0.00225 in.) Range: 41 μm (0.0016 inches) minimum to 99 μm (0.0039) maximum
Paper has a significant manufacturing tolerance and nominal paper designations do not

reflect actual measurements. The manufacturing tolerance must fall within the published

operating thickness range. You should test paper in your specific configuration before

using. If any spot measurement of the paper is outside the specified range, the paper does

not meet the paper specification, which will result in an end-user error paper jam.

To find supported papers:
1. Visit the Toshiba Global Commerce Solutions support website at

www.toshibacommerce.com/support.

2. Select SureMark

™

Printers.

3. Click on OEM Paper Testing under 4610-2CR/2NR to view the supported papers.
Attention: Printer reliability and performance are directly related to the quality of the supplies

you use. The published parameters for printer performance are established using supplies that

meet the specifications listed above.
Thermal paper with watermarks, coupons, or advertisements printed on the front or back of the

paper is not covered by Toshiba specifications. Some inks and printing processes will work

acceptably, while others will not. Printer problems that are caused by supplies that do not meet

Toshiba specifications might result in a billable service call, regardless of the existence of a

service contract.

Impact printing

With thermal impact station printing, both models can print up to three parts on a multi-part

form. Table 12 lists the specifications of supported single and multi-part forms.
• Test all forms in the printer to ensure acceptable performance prior to buying a significant

quantity.

• No binding holes or other holes should be within 10 mm (0.4 in.) from the right edge of the

form.

• Forms less than 0.15 mm (0.006 in.) thick with the grain of the paper perpendicular to the feed

direction (short-grain paper) should not be used for landscape printing.

• All documents with color will feed properly in the impact printing station. You should verify

your documents before use. See Figure 3 for document specification details.

Table 12. Specifications of supported single and multi-part forms

Specification

Value

Minimum width:

50 mm (2 in.)

Chapter 4. Using and maintaining the 4610 printer

41

«
...
39
40
41
42
43
...
»

Содержание SureMark 4610 2CR







































































Отзывы:

Нет отзывов

Похожие инструкции для SureMark 4610 2CR

Бренд: Odea Страницы: 24

Бренд: La Spaziale Страницы: 57

Бренд: Dalla Corte Страницы: 9

Бренд: Dalla Corte Страницы: 27

Бренд: NewAir Страницы: 12

STILISTA PRIMEO

Бренд: Martello Страницы: 20

Бренд: Hoshizaki Страницы: 25

Бренд: Proctor-Silex Страницы: 19

Бренд: RAMTONS Страницы: 5

Бренд: DeLonghi Страницы: 10

Horizon Elite HC Series

Бренд: Follett Страницы: 52

Бренд: CTM Страницы: 187

Бренд: Ugolini Страницы: 132

Commercial K-Cup Series

Бренд: Keurig Страницы: 28

Бренд: icetro Страницы: 28

K200 PLUS Series

Бренд: Keurig Страницы: 34

Бренд: Russell Hobbs Страницы: 8

Бренд: Espressione Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды