Toshiba SureMark 4610 1NR, Руководство по оборудованию

Страница: 30 / 64

B
A
Figure 11. Installing the interface card
1. As shown in Figure 11, place the printer unit upside down.
2. Insert the tab of the interface card (
A
) into the slot on the base of the printer (
B
).
3. Press down on the side of the interface card opposite the tab until the blue release button
slider snaps into place.
4. Connect the printer with your system unit or network (RS-232, RS-485, USB, or Ethernet
connector).
Note:
1. You might prefer to plug all cables into the interface card before installation; however,
do not plug in any power until after installation.
2. If you are using an RS-485 interface card, see “Routing the cash drawer and RS-485
cables” on page 30.
5. If you have a power cord, connect it to the printer.
Routing the cash drawer and RS-485 cables
To route the cash drawer and RS-485 cables together through the back cable slot:
1. Route the cash drawer cable through the cable slot (
A
in Figure 12).
30
Hardware Guide for Model 1NR