Toshiba SureMark 4610 1NR Скачать руководство пользователя | Manualshive

Страница: 20 / 64

background image

Device

Description

P

Cash drawer

Q

Power supply

Network interface adapter prerequisites

The network interface adapters (Ethernet and WiFi) have dependencies on the level of the

printer and printer firmware.
• The printer manufacturing date must be after June 10, 2013. Printers built prior to this date

have an older level main logic card (MLC) that will not support these adapters. The

manufacturing date is located under the paper cover above the serial number label (see

“Calling for service” on page 24).

• Firmware level 14 and above is required for an Ethernet interface adapter.

• Firmware level 18 and above is required for a WiFi interface adapter. EC firmware level 17.xx

will enable basic function, but will not match the function that is described in this manual.

These firmware levels will print a message as part of a test receipt that indicates the firmware

should be upgraded.

Note: The required firmware levels referenced above will not allow back leveling to a version

that does not fully support the installed adapter.
Important: If a network interface adapter is installed in a printer and the printer has back level

firmware or a MLC that does not support it, the printer will indicate an error:
• The ready light will blink amber with the internal LED#2, which indicates that the printer

firmware is back level. If the firmware is known to be at the minimum level identified, then

this condition indicates a failed adapter or other HW problem.

• A message is printed in the receipt station that the MLC card does not support network

adapters, which indicates that the MLC is back level and cannot be used with the installed

adapter.

Operating system requirements

You can download drivers from the Toshiba Global Commerce Solutions support website:

www.toshibacommerce.com/support.

The printer provides a compatibility mode to enable use of older drivers and applications with

only minor modifications. The default operating system is referred to as "Native Mode. "Native

Mode" provides functional enhancements and is supported by the most current applications and

drivers.

Operating system requirements includes a list of the printer interface options that are supported

for each OS/Driver combination.

Table 3. OS printer interface options

OS

Driver/API

4690 API

JavaPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

Direct IO

4690

USB

RS485

All

20

Hardware Guide for Model 1NR

«
...
18
19
20
21
22
...
»

Содержание SureMark 4610 1NR

































































Отзывы:

Нет отзывов

Похожие инструкции для SureMark 4610 1NR

Бренд: Unitech Страницы: 18

Бренд: Unitech Страницы: 26

Бренд: Panduit Страницы: 6

Бренд: Oki Страницы: 282

Бренд: MakerPi Страницы: 21

Бренд: Canon Страницы: 300

Бренд: Canon Страницы: 288

Бренд: MAKER MADE Страницы: 21

Бренд: Canon Страницы: 58

Бренд: Canon Страницы: 30

Бренд: NCR Страницы: 2

Бренд: NCR Страницы: 224

SelfServ Checkout 7350

Бренд: NCR Страницы: 20

Бренд: Samsung Страницы: 549

Бренд: Oce Страницы: 222

HP Toner Cartridges 6R941

Бренд: Xerox Страницы: 2

SignJet JS310 Series

Бренд: GRAPHTEC Страницы: 83

Бренд: Pantum Страницы: 164

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды