Toshiba Strata CIX GVPH, Руководство по программированию

Страница: 24 / 184

Configure UADM2 Software
Configuring UADM2 Software
2-2
Strata CIX40 Voice Processing Programming Manual 7/06
Configuring UADM2 Software
Settings for the communication port in UADM2 must match the corresponding parameters set
in the Stratagy System Configuration file on the GVPH.
For example, the UADM2 PC serial port settings made in the
Serial Port
field of this
procedure must be identical to the serial port definitions (i.e., set serial_port ) set in the
GVPH’s System Configuration file (see “System Configuration” on page 1-5 ).
! To configure UADM2 software
1. From the
C:\Uadmin20
DOS prompt, type
admin
and press
Enter
. The UADM2
screen displays.
2. From the UADM2 Main
screen, press
2
or
highlight the Configure
Admin option and press
Enter
. The Admin PC
Configuration screen
displays (shown right).
Note
Press
F1
for help with
any settings in the UADM2 Configuration screen.
3. Make any changes needed. See Table 2-1 for a description of each of the fields.
Note
Press
F2
in the Serial Port and Baud Rate fields to display a pop-up box with valid
entries.
4. To save your changes, you must have the cursor in the last field (i.e., Modem Init
String), and press
Enter
or the arrow down (
↓
) key
...or to exit without saving your changes, press
Esc
at any time.
The program returns to the UADM2 Main screen.
Table 2-1 UADM2 PC Configuration Fields
Field Description/Default
Advertising
Advertising string that displays when the Main Menu screen blanks after a specified number of
minutes of inactivity (per
tmo_blank parameter in the install.cfg file).
Possible values: 60-character string. The single quotes are required.
Default: ‘Strata CIX/CTX Voice Mail Administration’
Log File
System log file name. This log file contains connection information, any execution error information,
and file copy actions.
Note
It is a good idea to periodically archive or delete this file once or twice a year, whenever you
perform preventive maintenance.
Possible values: Eight-character file name, plus three-character extension. The single quotes are
required.
Default: ‘Remote.LOG’
Serial Port
Port number
Possible values: 1 ~ 4
Default: 1