Toshiba Strata AirLink DK40i, Руководство по установке и обслуживанию

Страница: 466 / 724

Station Apparatus
DKT2001 Digital Single Line Telephone
11-16
Strata DK I&M 6/00
Installation
1. Set the DIP switches to match Figure
11-13 . The DIP switches are preset
from the factory for the USA and
Canada. Refer to
Table 11-1 on Page
11-4 for other country settings.
2. If required to achieve maximum
distance (greater than 1000 ft.), install a
two-pair house cable (or external
power).
Programming
Program 03: Specify Code 61 to indicate a
station line PDKU2.
Program 27: Adjusts initial off-hook
volume level for digital telephone handsets.
Program 38: Specify Code 21.
Program 39: Specify button 01 as a [PDN].
Important!
Do not program CO lines or
secondary line appearances
onto button 01 or in any
other position. Since the
system assigns CO lines 01~17 by default, be sure to remove any CO line
appearances by programming them as Station Speed Dial buttons (code
).
Note If the
6SHHG'LDO6HOHFW
button is removed, the key becomes the
6SHHG'LDO
6HOHFW
button. While on an outside call, the user must press then to activate the
and DTMF tones for the duration of the call.
Program 92-5: Initializes initial ringing, speaker, and muted ring volume levels of digital
telephones.
Also, refer to the Numerical Programming Listing in the Strata DK Programming Manual for
other station-related programs.
3482
1
ON
2 3 4
1
ON
2 3 4
Figure 11-13 DKT2001 DIP Switch Settings