USING THE ANSWERING MACHINE
45
Answering System
CALLING IN FROM A REMOTE LOCATION
You can retrieve messages or change answering machine settings by
calling your phone from a touch-tone phone. Even if the answering
machine has been left off, you can still access it by turning it on first.
1
IF THE ANSWERING MACHINE IS OFF:
Let the phone ring at least 10 times. The line will connect and you
will hear several short beeps. Press
and enter your security
code (PIN).
IF THE ANSWERING MACHINE IS ON:
After playing your greeting message, press
and enter your
security code (PIN).
2
The answering machine announces the day, time, and the number
of new and old messages. The unit automatically starts playing the
recorded messages.
3
Press
and the appropriate number button that corresponds to
the operation you want (see TABLE OF COMMANDS on next
page).
4
When you have finished, press
and
or hang up to exit the
system.
NOTES:
• When entering your security code (PIN), the second digit must be entered
within 2 seconds after the first one.
• If you enter a wrong security code (PIN) 3 times, the line will be
disconnected.
• Enter the command within 15 seconds while you hear intermittent beeps.
Otherwise, the line is disconnected.
• When you call your phone while the message storage area is full, you will
hear several short beeps after the 10th ring. Enter
and your security code
(PIN), then you can continue to enter the commands.
• During operation from a remote location, [
], appears on the LED display.
#
5
#
#
#
#
SG-1981.qxd 5/21/1 5:00 PM Page 45
