E
ng
lis
h
DVD Menu Options
View Mode
Use view mode to scale an image that fits to the TV
screen
'
s width and height.
A
In
'
Video
'
, press
/
to select {
View Mode
},
then press
.
{
Fill
}
Fill the screen with decoded image.
{
Original
}
Display image as its original size.
{
Height Fit
}
Fit the screen height with image height.
{
Width Fit
}
Fit the screen width with image width.
{
Auto Fit
}
Automatically display the decoded image on screen
at a suitable size.
{
Pan Scan
}
Automatically display decoded image on full screen
without distortion.
B
Use
/
to select a setting and press OK to
confirm.
Tip:
-Depending on the type of disc, you may not be able
to view the mode as selected.
TV System
The video standard of the DVD player output can be
selected from “NTSC”, “PAL” or “Multi”.
{ NTSC }
: Select if your TV system is NTSC.
{ PAL }
: Select if your TV system is PAL.
{ Multi }
: The DVD video player automatically
identifies PAL or NTSC video system of a disc.
Connect a multisystem TV (PAL/NTSC compatible) to
view a picture.
A playback picture may be distorted when detected a
signal change between PAL and NTSC on the disc.
With the disc tray opened, you can also press
number button “3” to switch between “NTSC” and
“PAL”
.
Video Out
The video output of the DVD player can be selected
as “RGB” or “HDMI”.
A
In
'
Video
'
, press
/
to select {
Video Out
}, then
press
.
{
RGB
}
Select this for Scart connection.
{
HDMI
}
Select this for HDMI output.
B
Use
/
to select a setting and press OK to con
-
firm.
When SCART and HDMI cable are connected at
the same time, "HDMI" will be automatically selected
as the output of the DVD player. You cannot switch
to "RGB". Composite video will be output for scart
output. To select "RGB" output, simply disconnect
the HDMI cable. The video output will be switched to
"RGB".
Smart Picture
This DVD player provides four predefined sets of
picture color settings.
A
In
'
Video
'
, press
/
to select {
Smart Picture
},
then press
.
{
Standard
}
Select this for a preset standard picture setting.
{
Vivid
}
Select this to make the picture brighter.
{
Cool
}
Select this to make the picture softer.
{
Personal
}
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).
B
Use
/
to select a setting and press OK to
confirm.
C
If you select {
Personal
}, then proceed to steps
D
~
G
.
The setup menu appears.
Brightness
Contrast
Tint
Color
0
0
0
0
Close
D
Press
/
to highlight one of the following options.
Brightness
Increase the value to brighten the picture or vice
versa. Choose zero (0) for average setting.
Contrast
Increase the value to sharpen the picture or vice
versa. Choose zero (0) to balance the contrast.
Tint
Increase the value to darken the picture or vice
versa. Choose zero (0) for average setting.
Color
Increase the value to enhance the colour in your
picture or vice versa. Choose zero (0) to balance the
colour.
E
Press
/
to adjust the setting that best suits
your personal preference.
F
Repeat steps
D
~
E
to adjust your picture
preference.
G
Press
/
to select
＇
Close
＇
and press OK to
confirm.
HD Resolution
The video output of the DVD player can be selected
as “Auto”, “480p/576p”, “720p”, “1080i” or “1080p”.
A
In
'
Video
'
, press
/
to select {
HD Resolution
},
then press
.
B
Use
/
to select a setting and press OK to
confirm.
Tip:
If the Video Out mode is not set to"HDMI", you
cannot select the “HD Resolution”.
JPEG Interval
You can continuously playback all JPEG files
automatically. Set “JPEG Interval” to “5 Seconds”, “
10 Seconds” or “15 Seconds”.
A
In
'
Video
'
, press
/
to select {
JPEG Interval
},
then press
.
{
Off
}
Plays back one file at a time.
{
5 Seconds
}
Plays back images in the form of a slide show at 5
Helpful hint
: Press
to go back to previous menu item.
Press SETUP to exit the menu item.
Содержание SD3010KE
Страница 1: ...SD3010KE ...
