Toshiba SD1010KE, Руководство пользователя

Страница: 15 / 27

E
ng
lis
h
Starting disc playback
A
Turn on the TV and select the video input connected
to the DVD player.
B
Press 2 ON/STANDBY to turn on the DVD player.
C
Press OPEN/CLOSE to open the disc tray.
D
Place a disc onto the disc tray with the label facing
up, then press OPEN/CLOSE.

For double-sided discs, load the side which you
want to play facing up.
E
Playback may start automatically. If not, press PLAY/
PAUSE .

If a disc menu appears on the TV, see page 14,
'Using the disc menu'.

If the parental control was activated for the
inserted disc, you have to enter your four-digit
password, see page 21.

For more playback features, see pages 14 - 17.
Tips:
- Do not overturn the DVD player while disc loading,
playing or ejecting.
- Do not close the disc tray manually if the power is
switched off.
Basic playback control
Unless otherwise stated, all operations described are
based on Remote Control use.
Pausing playback
A
During playback, press PLAY/PAUSE to pause
playback and display a still picture.

Sound will be muted.
B
To resume normal playback, press PLAY/PAUSE
again.
Skipping chapter/track

Press PREV / NEXT to go to the previous
or next chapter/track during playback.

When PREV is pressed after the 5 seconds of
playback, playback will start from the beginning of the
current chapter/track. If you press the button within
the 5 seconds, playback will start from the beginning
of the preceding chapter/track.

Press DISPLAY to display the disc information for
title/chapter/track.

Use Number buttons to enter valid chapter / track
number directly. For the track/chapter numbers which
are greater than
＂
9
＂
, use
＂
+10
＂
button. Each
press increases the number by 10. Then press the
second digit of track/Chapter number.

The playback skips to the selected chapter / track.
Tip:
- For VCD 2.0 / SVCD discs, accessing tracks using
number buttons is not possible if the PBC mode is
turned on.
Stopping playback
A
During playback, press STOP  .

The DVD player memorises the stopped point.
Press PLAY/ PAUSE to resume playback from the
location where you stopped playback.

If you press STOP  again, the DVD player will
cancel the resume function.
Tips:
- Screen saver will start automatically if the disc
playback is stopped for about 2 minutes.
- The player will automatically switch to Power
Standby mode if you do not press any buttons for
about 22 minutes after the disc has stopped playing.
Program playback
During playback, press PROG, then the OSD will
appear as below:
For VCD:
Program
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Play
Clear
Clear All
1
3
5
7
9
11
13
15 2
4
6
8
10
12
14
16
For DVD:
Program
Title 1
Title 2
Title 3
Title 4
Play Clear Clear All
1
3
5
7
9
11
13
15 2
4
6
8
10
12
14
16
A
Use the

/

and OK button to select your desired
title/chapter/track in the list.
B
When you have finished programming, press

to
move the cursor to the 'Play', then press the OK
button or directly press PLAY/PAUSE button to
start the program playback.
C
Press CLEAR or select ' Clear ' to delete one by one
from last chosen track / title /chapter or select 'Clear
All' to clear all the programmed tracks/titles/chapters.
D
Press STOP twice to cancel program playback.
Operations for video playback (DVD/
VCD/SVCD)
Using the disc menu
Depending on the disc, a menu may appear on the
TV screen once you load in the disc.
To select a playback feature or item

Use

/

/

/

or number buttons on the remote
control, then press OK to start playback.
To access or remove the menu.

Press MENU on the remote control.
Playback Feature
Helpful hint : Some discs cannot be played on this DVD player due to the configuration and characteristics
of the disc, or due to the condition of recording and authorizing software.