40
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Notes:
• Press
CANCEL
to move cursor backward for correction.
• To record from external source set the channel to “L1” or
“L2”.
Notes:
• If the timer symbol (
) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press
TIMER REC
to cancel the
timer program or press
EJECT
to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press
TIMER REC
at first, then press
DVD/VCR SELECT
to change to VCR mode. After you use the
VCR, press
TIMER REC
again to put the VCR into timer
recording standby mode.
• If you press
TIMER REC
during timer recording, the recording
operation will be interrupted. If you press
TIMER REC
again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock
%
and
reprogram any timer recording.
Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.
Preparation:
• Press
DVD/VCR
to operate the DVD/VCR.
• Press
DVD/VCR SELECT
to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct
%
.
Example:
Program a timer recording for the 26th day,
channel 125 (Cable TV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
1
Press SET + or – to select one of the program
line, then press ENTER.
2
Press SET + or – to select the date, then press
ENTER.
3
Set the start time, end time, channel and tape
speed as in step 3.
4
〈
+/—/ENTER/CANCEL/MENU
〉
DATE
START END
CH
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
—
—
—
—
—
—
—
26(SA)
11:00
PM
11:30
PM
125
SLP
〈
+/—/ENTER/CANCEL/MENU
〉
DATE
START END
CH
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
—
—
—
—
—
—
—
26(SA)
11:00
PM
11:30
PM
125
SLP
To enter other programs, repeat steps 2
through 4.
• To return to the normal screen,
press
VCR MENU
twice.
5
Press TIMER REC. The timer symbol (
) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
6
Notes:
• The timer recording will start at 5 seconds before the time
you predetermined.
• If the timer symbol (
) does not appear on the display in
spite of the pressing of
TIMER REC
, the cassette may not
have been loaded
!
.
• If the cassette is ejected in spite of the pressing of
TIMER
REC
, the erase prevention tab of the cassette may have
been removed
!
.
• During Timer recording, the power cannot be turned off.
SET +/–
DVD/VCR
ENTER
CANCEL
VCR MENU
EJECT
〈
〉
〈
+/—/ENTER/CANCEL/MENU
〉
DATE
START END
CH
— — — — — —— : — — — : — — — ——
— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
—
—
—
—
—
—
—
—
26(SA)
TIMER REC
DVD/VCR SELECT
2F90201A (E)p35-40
4/4/05, 9:02 PM
40
Downloaded from
www.Manualslib.com
manuals search engine
Downloaded From Disc-Player.com Toshiba Manuals
