Toshiba SD-V340SC Скачать руководство пользователя

Страница: 9 / 135

Basic setup (VCR)

Connect the Antenna or Cable system.

• If you use a cable box, turn it on.

Clock setting

The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches
for a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.

Preparation:

• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

AUTO CLOCK setting

Plug the AC power cord to the AC outlet.

Make sure the DVD/VCR is turned off.

• If you press POWER, the Auto Clock

set is not programmed.

Wait at least three minutes and press POWER.

Press CALL to check the clock setting on
the on screen display.

If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.

AUTO CLOCK adjustment

To set AUTO CLOCK to off

The AUTO CLOCK adjustment will be updated at
6:00 AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK

adjustment to be performed, the cable box must be
left on.

• The AUTO CLOCK adjustment is not effective when

there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.

When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want AUTO CLOCK setting, it can be turned off:

Press VCR MENU.

Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.

Press SET + or – to select “AUTO CLOCK”.

Press ENTER to select “OFF”.

Press VCR MENU repeatedly to return to the
normal screen.

• When the AUTO CLOCK is set to

“OFF”, the AUTO CLOCK adjust-
ment does not function. You must set
the clock manually

CH 125

8 : 47AM MON

00 : 00 : 00 SP

STEREO SAP

POWER

VCR MENU

ENTER

CALL

VCR DVD

SET +/–

Basic

setup

(VCR)

Press VCR MENU.

Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.

Press SET + or – to select “STANDARD TIME”,
then press ENTER.

Press SET + or – to select your time zone,
then press ENTER.

Press VCR MENU until the MENU screen is
cleared.

In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the AUTO CLOCK setting.
To correct the situation:

Notes:
• To be able to select the standard time, the clock must first be

set by AUTO CLOCK once.

• If you live in Newfoundland and the AUTO CLOCK does not

function properly, set the AUTO CLOCK menu option to “OFF”
and set the clock manually.

Press VCR MENU.
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.

Press SET + or – to select “DAYLIGHT
SAVING TIME”, then press ENTER.

Press SET + or – to select one of the
options, then press ENTER. Press VCR
MENU until the MENU screen is cleared.

Notes:
• When shipped from factory, the DAYLIGHT SAVING TIME is

set to “AUTO” position.

• When the clock is not set, DAYLIGHT SAVING TIME setting

is not available.

• When there is no DAYLIGHT SAVING TIME in your area, al-

ways select “OFF” position in step 3.

When you want to set the DAYLIGHT
SAVING TIME manually, on the first
Sunday in April you set to “ON”, and
on the last Sunday in October you set
to “OFF”.

ON:

OFF:

AUTO:

for manual setting
(forward one hour)
for manual setting
(back one hour)
for automatic setting
(read XDS in the signal)

〈

〉

ATLANTIC

: GMT–4hours

EASTERN

: GMT–5hours

CENTRAL

: GMT–6hours

MOUNTAIN : GMT–7hours
PACIFIC

: GMT–8hours

ALASKA

: GMT–9hours

HAWAII

: GMT–10hours

AUTO

: AUTO SET

(GMT: Greenwich Mean Time)

〈

〉

To set DAYLIGHT SAVING TIME

You can set the DAYLIGHT SAVING TIME automatically or
manually.

To set STANDARD TIME

Basic setup (VCR)

CANCEL

Press VCR MENU.

EXAMPLE: Setting the clock to “8:30 AM” March, 25

(SAT), 2006.

8 : 30AM SAT

Manual clock setting

After setting the clock, date and time starts
functioning automatically.

Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.

To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.

Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.

Press SET + or – to select “CLOCK SET”,
then press ENTER.

Press SET + or – to set the month, then press
ENTER.

Set the day, year and time as in step 4.

〈

〉

Clock setting (Continued)

If the AUTO CLOCK process did not set the date and time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVING TIME.

VCR MENU

+/–/ENTER/CANCEL/MENU

MONTH

DAY

YEAR

TIME

1 (WED)

2006

12 : 00AM

+/–/ENTER/CANCEL/MENU

MONTH

DAY

YEAR

TIME

25 (SAT)

2006

8 : 30AM

ENTER

SET +/–

Basic

setup

(VCR)

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR’s memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.

Press VCR MENU. Press SET + or – to select
“CH SETUP”, then press ENTER.

Press SET + or – to select “TV/CABLE”.

CH SETUP

ADD/DELETE

CABLE

+/Ð/ENTER/MENU

AUTO CH MEMORY

TV/CABLE selection

Setting channels automatically

Repeat left step 1 and press SET + or – to
select “AUTO CH MEMORY”.

Press ENTER.

Auto tuning will begin. The channel dis-
play will count up and when finished,
the screen returns to normal.