20
Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to
optional audio equipment.
Warning
• When you are connecting (via the BITSTREAM/PCM
AUDIO OUT jack) an AV decoder that does not have
Dolby Digital, Digital Theater Systems (DTS) or MPEG2
decoding function, be sure to set “Audio Out Select” to
“PCM” from the on-screen displays
54 58
. Otherwise,
high volume sound may damage your hearing as well as
the speakers.
• When playing DTS-encoded discs (DVD video discs
and audio CDs), excessive noise may be output from
the analog stereo jacks. To avoid possible damage to
the audio system, you should take proper precautions
when the 2CH AUDIO OUT jacks of the DVD player are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external 5.1 channel
DTS Digital Surround™ decoder system must be
connected to the BITSTREAM/PCM AUDIO OUT jack of
the DVD player.
Notes
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack
of the DVD player to the AC-3 RF input of a Dolby Digital
Receiver. This input on your A/V Receiver is reserved for
Laserdisc use only and is incompatible with the
BITSTREAM/PCM AUDIO OUT jack of the DVD player.
• Connect the BITSTREAM/PCM AUDIO OUT jack of the
DVD player to the “OPTICAL” or “COAXIAL” input of a
Receiver or Processor.
• Refer to the owner’s manual of the connected equipment
as well.
• When you connect the DVD player to other equipment, be
sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD player has a wide dynamic
range. Be sure to adjust the receiver’s volume to a
moderate listening level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
• For connection to your TV, see “Connecting to a TV”
18 19
.
• For details of output sound, see
43
.
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
To play DVD audio discs
It is recommended that you connect your amplifier via
the 2CH AUDIO OUT (L/R) jacks or the 5.1CH
SURROUND AUDIO OUT jacks of the DVD player.
If you connect it via the BITSTREAM/PCM AUDIO OUT
jack, you cannot obtain the full benefit of DVD audio
sound.
Содержание SD-9200
Страница 1: ...DVD VIDEO PLAYER Sep 2000 s SD 9200 DIGITAL VIDEO ...
Страница 23: ...Basic playback Begin your operation Playing a Disc Variable Speed Playback Locating a Desired Section ...
Страница 65: ...Others Before Calling Service Personnel Specifications LIMITED WARRANTY DVD PLAYER ...
Страница 70: ......