Toshiba SD-3860SC, Руководство по обслуживанию

Страница: 12 / 67

40
Function setup
Brand name Brand Code
of your TV
Toshiba 01
Bell & Howell 09
Carver 10
Celebrity 03
Citizen 12
Curtis Mathes 09, 12
Dumont 14
Electro band 03
Emerson 09,11
Fisher 09
GE 02, 07, 11
Gibralter 14
Goldstar 11
Hallmark 11
Hitachi 06
Infinity 10
JBL 10
JCB 03
JVC 05
LXI 01, 02, 09, 10, 11
Magnavox 10
Marantz 10
Megatron 06, 11
Memorex 04, 09, 11
MGA 04, 11
Midland 02,07, 14
Mitsubishi 04, 11
Motorola 08
MTC 12
NAD 01, 11
Nikko 11
Optimus 09
Optonica 08
Panasonic07, 10, 15
Multi brand remote control
The remote control can be compatible with various brands of TV by
setting their control codes. The TOSHIBA code has initially been set
to control TOSHIBA TVs.
Setting TV control codes
Press TV to set the remote control operating
your TV.
1
2
Important
Some TV’s may not respond to all the operations left, or
may not be operated at all with this remote control. In
this case, operate your TV with its own remote control.
Notes:
• For some brands, several control codes (brand codes) are al-
located. Try each of them until the buttons work on your TV.
• If you replace the remote control’s batteries, set the brand code
again.
0–9
PROGRAM
POWER
INPUT SELECT
100
DISPLAY
ENTER
CH+/–, VOL+/–
While holding down PROGRAM enter the two
digits of your TV's brand code (listed below)
using Number buttons (0–9), then release
PROGRAM.
Point the remote control at your TV and use each
button listed below to make sure that your TV is
operated correctly.
POWER To turn the TV on or off.
CH +/– To select TV channels in the upper
or lower direction.
VOL +/– To adjust the sound level.
INPUT SELECT To select an external source such
as a VCR.
Number buttons To select TV channels. When select-
ing channels 1 to 9, first enter 0 and
then desired number.
100 To substitute for 100 channel key.
DISPLAY To turn on or off TV’s screen dis-
play.
ENTER To use for the TV’s ENTER key.
(0–9)
TV
Table of TV brand codes
Brand name Brand Code
of your TV
Penney 01, 02, 07, 11, 12
Philco 10
Philips 10
Pioneer 16
Princeclub 12
Prism 07
Proscan 02
Proton 11
Pulser 14
Quasar 07, 15
Radio Shack 13
RCA 02
Realistic09, 11, 13
Runco(NEC) 14
Samsung 11, 12
Sanyo 09
Scotch 11
Scott 11
Sears 01, 02, 09, 10, 11
Sharp 08, 13
Sony 03
Soundesign 11
Supreme 03
Sylvania 10
Tandy 08
Technics 07, 15
Techwood 07
Teknika 04,10,12
TMK 11
Victor 05
Vidikron 10
Vidtech 11
Wards 10, 11,13
Zenith 14
41
Symptom
No power.
No picture.
No picture, or the screen is
blurred or divided into two
parts.
No sound.
The playback picture has
occasional distortion.
Brightness is unstable or
noises are present in the
playback pictures.
The DVD video player does
not start playback.
Playback does not follow the
course of the disc’s program.
Buttons do not work.
The remote control does not
work properly.
Cause
• The power plug is disconnected.
• The TV is not set to receive DVD signal
output.
• The video cable is not connected securely.
• The COMPONENT/S-VIDEO selector is
not set correctly.
• The PROGRESSIVE scan is On through
the unit is connected to a TV via the
VIDEO out or the S-VIDEO out jack.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• The audio cable is not connected securely.
• The audio receiver or TV is turned off.
• The unit is in the advanced playback mode.
• The disc is dirty.
• It is in fast forward or fast reverse
playback.
• The effect of copy protection.
• No disc is inserted.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the guide.
• The disc is dirty.
• The parental lock function is set.
• appears on the screen.
• It is in the mode of repeat playback,
program playback, etc.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• The TV button is pressed.
• The remote control is not pointed at the
remote sensor of the DVD video player.
• The remote control is too far from the DVD
video player.
• The batteries in the remote control are
exhausted.
Correction
• Connect the power plug securely into the
wall outlet.
• Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
• Connect the video cable securely into the
appropriate jacks.
• Set the COMPONENT/S-VIDEO selector
to the appropriate position.
• Set the PROGRESSIVE scan Off.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
• Connect the audio cable securely into
the appropriate jacks.
• Turn on the equipment connected with
the audio cable.
• Resume the normal playback.
• Eject the disc and clean it.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
• Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VCR or TV/VCR combination.
• Insert a disc.
• Insert a playable disc. (Check the disc
type and color system.)
• Place the disc with the playback side
down.
• Place the disc correctly inside the guide
on the disc tray.
• Clean the disc.
• Cancel the parental lock function or
change the parental lock level.
• The function is prohibited with the unit or
the disc.
• These operations may prevent a proper
progress of the contents.
• Turn the power on or off with ON/
STANDBY ( ) .
Or disconnect the power plug and insert
it into the wall outlet again.
• Press the DVD button to operate the DVD.
• Point the remote control at the remote
sensor of the DVD video player.
• Operate the remote control within about
7 m.
• Replace the batteries with new ones.
14
14, 15
14, 15
Troubleshooting guide
Check the following guide for the possible cause of a problem before contacting service.
14~17
–
20
–
14
18
Page
18
18
37
8
–
–
13
13
13
7
7
32
–
Others
–
8
18
42
Others
Specifications
DVD Video Player
Power supply 120 V AC, 60 Hz
Power consumption Operation : 10 W
Standby : 3 W
Mass 4.4 lbs (2.0 kg)
External dimensions Width : 16 - 15/16 inches (430mm)
Height : 2 - 5/16 inches (59mm)
Depth : 8 - 1/8 inches (206mm)
Signal system Standard NTSC
Pickup CD : Wavelength: 775 - 815 nm
Maximum output power: 0.5 mW
DVD : Wavelength: 650 - 666 nm
Maximum output power: 2.0 mW
Frequency response DVD : 4 Hz - 22 kHz
CD : 4 Hz - 20 kHz
Harmonic distortion 0.008 %
Wow and flutter Below measurable level
Operating conditions Temperature: 5 °C to 40 °C, Operation status: Horizontal
Outputs
Video output 1.0 V (p-p), 75
Ω
, negative sync., pin jack x 1
S video output (Y) 1.0 V (p-p), 75
Ω
, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75
Ω
Component video output (Y) 1.0 V (p-p), 75
Ω
, negative sync., pin jack x 1
(P
B
)/(P
R
) 0.7 V (p-p), 75
Ω
, pin jack x 2
Audio output (DIGITAL COAXIAL) 0.5V (p-p), 75
Ω
, pin jack x 1
Audio output (DIGITAL OPTICAL) Optical connector x 1
Audio output (ANALOG) –12 dBm, 1k
Ω
, pin jacks (L, R) x 1
COMPONENT/S-VIDEO selector Slide switch x 1
Supplied Accessories
Audio/video cable ................................................. 1
Remote control (SE-R0121) ................................. 1
Batteries (AAA) ..................................................... 2
• Designs and specifications are subject to change without notice.
43
Limited Ninety (90) Day Warranty
TACP/THI warrant this product against defects in materials
or workmanship for a period of ninety (90) days after the
date of original retail purchase. During this period, TACP/
THI will repair or replace a defective product or part, at their
option, with a new or refurbished product or part without
charge to you. You must deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products L.L.C.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. During this
period, TACP/THI will repair or replace a defective product
or part, at their option, with a new or refurbished product or
part without charge to you, except that if a defective part is
replaced after ninety (90) days from the date of the original
retail purchase you pay labor charges involved in the
replacement. You must also deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products L.L.C.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian Consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Rental Units
The warranty for rental units begin with the first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited
ninety (90) day warranty for all parts and labor.
Owner’s Manual
You should read the owner’s manual thoroughly before
operating this product. You should complete and mail the
enclosed Demographic card within ten (10) days after you,
or the person who has given you this product as a gift,
purchased this product. This is one way to enable TACP to
provide you with better customer service and improved
products. Failure to return the card will not affect your rights
under this warranty.
Your Responsibility
The above warranties are subject to the following
conditions:
(1) You must retain your bill of sale or provide other proof
of purchase.
(2) You must notify a TACP/THI/TCL /Authorized Service
Station within thirty (30) days after you discover a
defective product or part.
(3) All warranty servicing of this product must be made by a
TACP/THI/TCL Authorized Service Station.
(4) U.S.A. warranties are effective only if the product is
purchased and operated in the Continental U.S.A. or
Puerto Rico.
(5) Labor service charges for set installation. Set up,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
(6) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
product or parts which have been lost or discarded by
you or to damage to products or parts caused by
misuse, accident, damage caused by Acts of God, such
as lighting or fluctuations in electric power, improper
installation, improper maintenance or use in violation of
instructions furnished by us; or to units which have
been altered or modified without authorization of TACP/
THI/TCL or to damage to products or part thereof which
have had the serial number removed, altered, defaced
or rendered illegible.
(7) Should you elect to return your DVD Unit to TACP after
the ninety (90) days and within one (1) year, or after the
warranty period has expired: Call (800)-631-3811 to
receive information concerning an exchange price.
Payment must be enclosed with product in the form of a
certified check or money order including reason for
return.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and
will be returned as received.
(Continued)
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, L.L.C. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift
from the original purchaser and to no other purchaser or transferee.