31
One-touch Timer Recording (OTR)
3
4
OTR 1 : 30
CH 29
“REC” will keep blinking on the display.
VCR
1
2
8+4
CH 29
OTR 0:30
INDEX
REC
VCR
The one-touch timer recording feature
provides a simple and convenient way
to make a timed recording.
Note:
If the tape supply has not sufficed for OTR
recording, the clock symbol (
) will blink
at the tape-end and then VCR mode will
change to DVD mode.
In this case, press
TIMER REC
to cancel
the
blink or press
EJECT
on
the DVD/
VCR to remove the cassette tape.
Preparation
• Turn ON the TV and set to the AV input mode.
• Press
VCR
to select the VCR mode. (The VCR indicator will
light.)
Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will
automatically turn on.)
Select the program(e.g.29) you want to record with
CH +/–
or
number buttons
.
1~9 : e.g. 5 = press “
5
”
10~80 : e.g. 29 = press “
2
” and “
9
”.
If a recording in Long Play mode
is intended, press
SP/LP
to dis-
play "LP".
Press
REC/OTR
twice. The recording will start and stop after 30
minutes. Each additional press of
REC/OTR
will increase the
recording time to a maximum of 6 hours .
If
REC/OTR
is pressed once during the recording, the remain-
ing time appears on the screen. When pressed again, the re-
cording time is extended to the nearest 30-minute or 1-hour
interval.
To Extend the Recording Time
Press
REC/OTR
repeatedly until the
desired time appears on the screen.
To stop the OTR
Press
STOP
.
00:00:00 LP
2:00
5:00
4:00
3:00
1:30
Recording
0:30
1:00
6:00
2J50301A [EN] P29-37
3/22/06, 8:11 PM
31
