Toshiba SD-33VB, Руководство по обслуживанию

Страница: 26 / 197

1-25
Operation with tape (Continued)
OPERA
TION
VIDEO Plus+ recording
VIDEO Plus+ greatly simplifies entering the date,
channel, start and end times of a Timer Recording
by simply entering a PlusCode. PlusCodes are
published in most TV guide magazines; they can
vary one to nine numbers in length.
VIDEO Plus+ and Pluscode are registered
trademarks of Gemstar development corporation.
The VIDEO Plus+ system is manufactured under
license from Gemstar development corporation.
Video Plus+ can only work successfully if TV channels
have been tuned and stored in the order described on
page 12 of this instruction book
.
11
Make sure that TV channels have been tuned and
stored in correct VIDEO
Plus+
order.
Insert a video cassette with protection tab into your
DVD+VCR.
22
Press VIDEO
Plus+
.
33
Press
v
or
V
to select the recording type.
ONCE : To record once.
DAILY : To record every day (except Saturday and
Sunday) at the same time.
WEEKLY : To record at the same time every week.
44
Press the numbered buttons to enter the
PlusCode of the TV programme that you wish to
record.
If you make a mistake press
b
then enter the
revised number.
55
Press ENTER/OK .
If PLEASE CHECK is displayed it means that you
have entered the wrong PlusCode, entered the
PlusCode again.
If “
- - ” is displayed, you have to enter the
programme number of the station, you want to
record from.
66
Press
b
or
B
to select the settings that you wish to
revise. (PR, DATE, TIME, PDC and SP).
Press
v
or
V
to enter the correct information.
77
Press
v
or
V
to switch VPS/PDC on or off.
Press
B
to select the recording speed.
Press
v
or
V
to select the desired tape speed (SP,
IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
IP mode is not selected when VPS/PDC is ON.
Check that the timer event details are correct.
If you wish to record from AUDIO IN and VIDEO IN
on the front or from either of the EURO SCART
sockets on the back of VCR, press INPUT SELECT
to select for correct display (AV1, AV2 or AV3).
88
If you want to make another VIDEO Plus+
recording repeat stages
2 - 7 .
Press VCR MENU twice to return to TV Picture.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
Press
++++////1 1
1 1
to switch your DVD+VCR power off
mode.
TIMER will appear in the DVD+VCR’s display
window while your VCR waits to make the
recording. To watch a DVD during timer recording
standby mode, press
++++////1 1 1 1
and DVD to switch to
DVD mode.
Notes
z Programme Delivery Control (PDC)
The Programme Delivery Control ( PDC ) system
adjusts the start and end times of a timer record
event. This can be particularly
useful with sports events which may run over into
extra time. The PDC signal is transmitted by the
broadcaster and this controls your video recorder’s
timer. Currently only a limited number of TV
companies transmit PDCsignals. Please make sure
that when recording from channels that do not
broadcast PDC that you turn PDC OFF.
ONCE
OK i
0~9,
VIDEO PLUS+
- - - - - - - - -
REC
PR DATE TIME
- - - - SP
- - - -
SP
- - - - SP
- - - -
SP
- - - -
SP
- - - - SP
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
10
BBC1 12 SP
11 11 55 ~ : :
i
PR DATE TIME
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
10 BBC1 12
SP
11 11 55 ~ : :
i
ONCE
OK
i
0~9,
VIDEO PLUS+
24687654 3
REC
PR DATE TIME
- - - - SP
- - - - SP
- - - -
SP
- - - - SP
- - - - SP
- - - -
SP
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
10
BBC1 12
SP 11 11 55 ~ : :
i