Toshiba SD-1200 Скачать руководство пользователя страница 65

Страница: 65 / 122

1-2. PC Board Replacement

1-2-1. Main PC Board

Note:

• Before removing the main PC board (4), be sure to

short-circuit the laser diode output land.

After replacing, open the land as it was after inserting

the flexible cables (1).

1. Remove the top cover. (Refer to item 1-1-1.)

2. Remove six flexible cables (1) and remove one

connector (3).

3. Remove four screws (2).

4. Release two claws and remove the main PC board (4).

Note:

• When mounting, be sure to twist the wire for the

connector (3) several times.

Fig. 2-1-9

1-2-2. Output PC Board

1. Peel off the tape (3).

2. Remove the connector (2).

3. Disconnect two flexible cables (1).

4. Remove two screws (4).

5. Remove two screws (5) and remove the output PC

board (6).

Note:

• When mounting, be sure to twist the wire for the

connector (2) several times.

Fig. 2-1-10

Tape (3)

Connector (2)

Screws (4)

Screws (5)

Flexible cables (1)

Output
PC board (6)

Twist more than 9 times.

Flexible
cables (1)

Screws (2)

Main PC board (4)

Claws

Pickup head

Laser diode
output land

Connector (3)

Twist more than 7 times.

Содержание SD-1200



























































































































Результаты поиска

Содержание SD-1200

Отзывы:

Toshiba SD-1200, Руководство по обслуживанию, Страница: 65 / 122

Результаты поиска

Содержание SD-1200

Отзывы: