manualshive.com logo in svg

Toshiba Satellite X200, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Satellite X200 Скачать руководство пользователя страница 205

Appendix A  

 

Appendix A  Handling the LCD Module 

Precautions for handling the LCD module 

The LCD module can be easily damaged during assembly or disassembly. Observe the following 
precautions when handling it to prevent damaging it. 

 

1.

 

When installing the LCD module in the display assembly, make sure that you seat it so 
that it is properly aligned and maximum visibility of the display is maintained. 

 

 

2.

 

Be careful to align the holes at the four corners of the LCD module with the 
corresponding holes in the LCD cover before securing the module with screws.  
Do not force the module into place, because stress can affect its performance. 

Note: The panel’s polarized surface is easily scratched and damaged, so handle it 

carefully. 

 

Satellite X200/ X205 Series Maintenance Manual 

[CONFIDENTIAL] 

A-1 

Содержание Satellite X200



























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды