manualshive.com logo in svg

Toshiba SATELLITE R630, Руководство пользователя, Страница: 40 / 191

Поделиться
Скачать
Toshiba SATELLITE R630 Скачать руководство пользователя страница 40

System indicators

The LED system indicators for specific computer operations glow when
those operations are in progress.

Figure2-9System indicators

DC IN

The 

DC IN

 indicator normally glows green when

power is being correctly supplied from the AC
power adaptor. However, If the output voltage
from the adaptor is abnormal, or if the computer's
power supply malfunctions, this indicator will
flash orange.

Power

The 

Power

 indicator normally glows green when

the computer is turned on. However, if you turn
the computer off into Sleep Mode, this indicator
will flash orange - approximately two second on,
two seconds off - both while the system is
shutting down and while it remains turned off.

Battery

The 

Battery

 indicator shows the condition of the

battery's charge - green indicates the battery is
fully charged, orange indicates the battery is
charging, and flashing orange indicates a low
battery condition. Please refer to chapter 6,

Power and Power-up Modes

 for more information

on this feature.

Hard Disk Drive/
Optical Disc Drive/
eSATA

The 

Hard Disk Drive/Optical Disc Drive/eSATA

indicator glows green whenever the computer is
accessing the built-in hard disk drive, optical disc
drive or eSATA device.

Bridge media slot

The 

Bridge media slot

 indicator glows green

when the computer is accessing the Bridge
media slot.

Wireless
communication

The 

Wireless communication

 indicator blinks

orange when the Bluetooth and Wireless LAN
functions are turned on.
Only some models are equipped with Bluetooth
and Wireless LAN functions.

PORTÉGÉ R700 / Satellite R630

User's Manual

2-11

Содержание SATELLITE R630
































































































































































































Отзывы:

Нет отзывов