manualshive.com logo in svg

Toshiba Satellite R10, Руководство по обслуживанию, Страница: 321 / 384

Поделиться
Скачать
Toshiba Satellite R10 Скачать руководство пользователя страница 321

 

Appendix  A Handling the LCD Module 

 

A-2 

 

Satellite R10 Maintenance Manual (960-509) 

 

3.

 

If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, 
try breathing on the surface to create a light condensate and wipe it again.  

If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to 
a cloth and then wipe the panel’s surface. Do not apply cleanser directly to the panel. 

 

 

4.

 

If water or other liquid is left on the panel’s surface for a long period, it can change 
the screen’s tint or stain it.  Be sure to quickly wipe off any liquid. 

 

 

Содержание Satellite R10

































































































































































































































































































































































































Отзывы:

Нет отзывов