The display screen of some models is a touch sensitive, digitizer
screen, and works with a stylus pen. However, the outer edges of the
screen might be less sensitive. Keep the Stylus Pen or the Reserve
Pen inside the display area when you use it near the edges of the
display screen. The position of the pen might not be recognized if you
move the pen too fast towards the outer edge. Make sure to slide the
pen slowly in areas near the edges of the screen. Use the pen in the
areas enclosed by the dotted line as shown in the following figure.
Figure 4-2 Use area of the pen
Changing the screen orientation
When operating the computer in tablet mode, you can change the screen
orientation by rotating the computer sideways. The screen orientation
automatically changes according to the rotation angle detected.
Figure 4-3 Rotating the computer sideways
1
2
1. Landscape mode
2. Portrait mode
Refer to the
section for how to manually disable the
automatic screen orientation.
When operating the computer in laptop/presentation mode, however, the
automatic screen orientation is locked, and stays in
landscape mode
.
Avoid having direct contact with the other edges of the hand held
device while the wireless device is turned on and transmitting. Only
factories installed wireless transmitter can be used with this hand held
device to satisfy RF exposure compliance.
User's Manual
4-2