manualshive.com logo in svg

Toshiba Satellite Pro U300-RW1, Руководство пользователя, Страница: 54 / 231

Поделиться
Скачать
Toshiba Satellite Pro U300-RW1 Скачать руководство пользователя страница 54

54

Getting Started

Adding memory (optional)

If your system has the memory modules stacked on top of one 
another, you must remove the top module first before 
removing/installing the bottom module. 

3

Gently lift the memory module to a 30-degree angle and slide it 
out of the slot.

 

(Sample Illustration) Removing the memory module

4

Replace the memory module slot cover and secure it using the 
screws.

5

Re-insert the main battery. For more information on inserting 
the main battery, see 

“Inserting a charged battery” on page 103

.

6

Turn the computer right side up.

7

Reconnect the cables.

8

Restart the computer.

TECHNICAL NOTE: You must have at least one memory module 
installed for the computer to work.

NOTE

Front of computer

Memory slots

Содержание Satellite Pro U300-RW1








































































































































































































































Отзывы:

Нет отзывов