background image

TOSHIBA

Tough Enough for Today’s World.

OPTIONAL PC CARD REMOVAL

1. Press the 

eject button

 of the PCCard you want to

    remove.
2. Press the extended eject button to pop the 

PC card

    

out.

3. Grasp the 

PC card

 and remove it.

SELECT BAY REMOVAL

1. Turn the computer upside down.
2. Slide the

 release lever

 in the direction of the arrow.

3. Pull out the 

select bay device

 in the direction of the

    arrow.

FIELD REPLACEABLE UNIT DOCUMENTATION

6100 Series

BATTERY PACK  REMOVAL

1. Turn the computer upside down as shown.
2. Slide the battery lock to unlock position.
3. Slide 

battery release lever 

in the direction of  the

     arrow.  
3. Lift out the

 battery

.

CD-R/W/DVD-ROM DRIVE DISASSEMBLY

1. Remove 

five M2x3 silver flat head screws 

securing 

    the base cover and lift out the

 cover

.

2. Remove 

two M2x8 silver screws 

securing the

    

connector cover.

3. Remove the 

connector cover

 and the 

connector 

    

from the CD-R/W/DVD-ROM drive.

Release 
lever

Battery 
Pack

PC card

Eject button

Release lever

Select bay
device

  Satellite Pro

TM

CD-R/W/DVD-ROM
drive

M2x3 silver
flat head
screws

Connector cover

M2x8 silver 
screws

Connector

Base cover

Note: Before removing any PC Card device, make
         sure it is “STOPPED” in  the PC Card manager.

Battery lock

Содержание Satellite Pro 6100 Series













Отзывы: