Toshiba Satellite M40X-119 Скачать руководство пользователя страница 108

Страница: 108 / 170

6-4

User’s Manual

Power and Power-Up Modes

Real Time Clock battery

The Real Time Clock (RTC) battery provides power for the internal real

time clock and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this

data and the real time clock and calendar stop working. The following

message appears when you turn on the power:

When this error appears, the following action is recommended.
1. Plug in AC over 24 hours.
2. Press F2 to enter BIOS setup menu.
3. Set correct time and date.

■

The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the battery

as required by local ordinances or regulations. Use only batteries

recommended by TOSHIBA as replacements.

■

Do not remove the Battery Pack while the computer is in Standby

mode. Data is stored in RAM, so if the computer loses power,

it will be lost.

■

Battery type (depending on the model purchased):

PA3395U-1BAS/PA3395U-1BRS

ERROR 0271:Check date and time settings.

WARNING 0251:System CMOS checksum bad -

Default configuration used.

Press <F1> to resume, <F2> to Setup.

The computer's RTC battery is a lithium battery and should be replaced

only by your dealer or by a TOSHIBA service representative. The battery

can explode if not properly replaced, used, handled or disposed of.

Dispose of the battery as required by local ordinances or regulations.

If you still see error message after above action, please get contact with

TOSHIBA service.

Содержание Satellite M40X-119











































































































































































Результаты поиска

Содержание Satellite M40X-119

Отзывы:

Похожие инструкции для Satellite M40X-119

Бренды по названию

Популярные бренды

Toshiba Satellite M40X-119, Руководство пользователя

Результаты поиска

Содержание Satellite M40X-119

Отзывы:

Похожие инструкции для Satellite M40X-119

Бренды по названию

Популярные бренды